[UBUNTU] 우분투 20.04 USB 스틱에 설치 How to Install Ubuntu on a USB Flash Drive

How to Install Ubuntu on a USB Flash Drive

Ubuntu is one of the most widely used Linux operating systems among home users and enterprises.Ubuntu is normally installed by booting from a USB.

Installing the entire Ubuntu on a USB Flash drive is simple and straightforward. We need a bootable usb and another USB to which complete Ubuntu to be installed.

You can use ubuntu installed USB as a portable computer and bootable device. This tutorial we learn how to install the entire Ubuntu on a USB Flash Drive.

Prerequisites

The minimum recommended space required for Ubuntu operating system is 25GB. We need a USB with minimum 32GB to which we install the complete Ubuntu.

Also required a bootable Ubuntu USB or a Live CD. Earlier we learned to create a bootable USB and can use any tools to create it.

Once you have the bootable USB drive ready, plug it in and reboot your PC. Be sure that the BIOS is configured to boot from the bootable USB flash drive.

Installing Ubuntu on a USB drive

Once Ubuntu has booted using the bootable USB, plug in the second USB drive on which Ubuntu will be installed.

Click on the 'Install Ubuntu' option.

Ubuntu Installation options
Ubuntu welcome Install screen

In the next step, select the preferred Keyboard Layout & language and click on the 'Continue' button.

Select Keyboard layout during Ubuntu installation
Select Keyboard layout

In the next step, select the nature of installation ( either Normal or Minimal ) and the updates and third-party Apps that you'd wish installed. Then click 'Continue'.

Select the updates and installation mode Ubuntu 20.04 installation
Choose updates and other software

In the 'Installation Type' section, select 'Something Else' so that the installer can present you with an option to install Ubuntu on your USB drive.

Installation type  something else Ubuntu 20.04
Choose Installation type

The next window displays all the available drives on which Ubuntu can be installed. This is the important step, carefully choose the correct USB drive partition.

In our case, the USB drive partition is /dev/sdb and this is where we shall install Ubuntu. In your case, the label might be different.

Note: Menu may look different based on the Ubuntu version. Here we using Ubuntu 20.04 LTS.

So, click on your USB drive and click the 'New Partition Table' option.

Create a new partition table on the USB drive
Create a new partition table on the USB drive

When prompted to delete all the partitions, click 'Continue' to format and erase pre-existing partitions on the USB drive.

Proceed to create new partitions
Proceed to create new partitions

This creates free space in the partition table equivalent to the capacity of your USB drive. Click on the plus sign ( + ) to begin creating partitions.

We will create the following partitions on the USB drive:

/boot - 2GB

/ ( root ) - 55 GB

Swap 4 GB

Let's begin by creating the boot partitions. Specify the size in Megabytes and ensure mount point is set to /boot then click 'OK'.

Create boot partition

This takes you back to the partition table. As evident, the boot partition has been created. To create the root ( / ) partition, click on the plus sign ( + ) once again.

Create another partition on USB drive during installation
Create another partition on USB drive

Then specify the root partition size and mount point as / . And then click 'OK'.

경축! 아무것도 안하여 에스천사게임즈가 새로운 모습으로 재오픈 하였습니다.
어린이용이며, 설치가 필요없는 브라우저 게임입니다.
https://s1004games.com

Create root partition on USB drive
Create root partition on USB drive

So far, we have 2 partitions, boot and root partitions. To create the swap mount point, click on the plus sign ( + ) for the last time.

Partition table boot and root partition created
Partition table boot and root partition created

Define the size of Swap and in the 'Use as:' option, select Swap area. Then click 'OK'.

Create Swap mount point Ubuntu
Create swap partition

The partition table is now complete with all the partitions in place. To start the installation of Ubuntu on the USB drive, click on 'Install Now'.

Partition table complete Ubuntu 20.04
Partition table complete - start installation

To save and write changes to the USB drive, click 'Continue'

Write changes to disk and begin the installation
Write changes to disk and begin the installation

The installer automatically detects your location on the World map. Alternatively, you can click anywhere on the map to change your location. When satisfied, click on 'Continue'.

Select location on the world map Ubuntu 20.04
Select location on the world map

In the next step, fill out your credentials including your name, computer's name, username, and a strong password. Then click 'Continue'

Fill out user details in Ubuntu 20.04
Fill out user details

The installer will start installing all the software packages required by the system. Since the installation is being performed on a USB flash drive and not on a PC hard drive, the installation will take quite a while. So, just give it time as the installation progresses.

Installing Ubuntu 20.04 on USB flash drive
Installing Ubuntu on to USB flash drive

Finally, when the installation is complete, hit the 'Restart now' button. Be sure to remove the USB drives so that your PC can boot normally into its operating system.

Installation complete Restart Ubuntu
Installation complete Restart Ubuntu

You can now plug your USB drive into any PC and boot into your instance of Ubuntu that you have just created.

Conclusion

As demonstrated, the installation of Ubuntu to a USB drive is pretty similar to installing it normally on a PC. However, the performance of Ubuntu on a USB drive, is quite slow. It's therefore recommended to only carry out light workloads for best performance.

[출처] https://linoxide.com/how-to-install-ubuntu-on-usb-flash-drive/

 

 

 

 

 

 

 

 

 

 

 

 

본 웹사이트는 광고를 포함하고 있습니다.
광고 클릭에서 발생하는 수익금은 모두 웹사이트 서버의 유지 및 관리, 그리고 기술 콘텐츠 향상을 위해 쓰여집니다.
번호 제목 글쓴이 날짜 조회 수
23 [C/C++ 인공지능] Artificial Neural Network C++ Class : 인공신경망 C++ 클래스 file 졸리운_곰 2023.11.25 4
22 [C/C++ 인공지능] Visual Studio 2019에서 LibTorch 사용하기 file 졸리운_곰 2023.11.20 11
21 [C/C++ 인공지능] A Simple and Complete Explanation of Neural Networks : 신경망에 대한 간단하고 완전한 설명 file 졸리운_곰 2023.10.22 8
20 [C/C++ 인공지능] Deep Learning from Scratch in C++: Tensor Programming file 졸리운_곰 2023.09.06 7
19 [C/C++ 인공지능] Getting Started with mlpack 졸리운_곰 2023.01.28 12
18 [C/C++][인공지능] Most Useful C/C++ ML Libraries Every Data Scientist Should Know file 졸리운_곰 2022.10.01 30
17 [인공지능] 추론 기법 file 졸리운_곰 2022.05.05 38
16 [C++ 인공지능] C ++을 이용한 단순 MLP 역 전파 인공 신경망 (단계 별) file 졸리운_곰 2022.04.11 80
15 [C/C++인공지능] An Introduction to Machine Learning Libraries for C++ file 졸리운_곰 2021.12.06 53
14 [C/C++][tensorflow 1.x] windows C lib : [Tensorflow] How to Install Tensorflow for C API file 졸리운_곰 2021.11.19 10
13 [C/C++][tensorflow] tensorflovw 1.x version 텐서플로우 C 예제 file 졸리운_곰 2021.11.19 176
12 [C/C++ 인공지능][linux][cuda] flashlight file 졸리운_곰 2021.11.09 16
11 [C/C++] (고전 기호 처리 인공지능) 전문가 시스템 file 졸리운_곰 2020.06.13 59
10 [유전알고리즘] 자동 그림생성 프로그램 - Evolving Image file 졸리운_곰 2018.03.04 618
9 대화 프로그램 - ELIZA 졸리운_곰 2018.03.04 93
8 Caffe 설치하기 ๑•‿•๑ (2) file 졸리운_곰 2018.02.21 50
7 Caffe 설치하기 ๑•‿•๑ (1) file 졸리운_곰 2018.02.21 68
6 Windows 에 Caffe 설치하기 (๑•‿•๑) 졸리운_곰 2018.02.21 78
5 Windows에서 Caffe 예제 돌리기 : MNIST(1) (๑•‿•๑) file 졸리운_곰 2018.02.21 84
4 Caffe 구성 요소들 알아보기: blobs, nets, layer, solver, prototxt ๑•‿•๑ file 졸리운_곰 2018.02.21 337
대표 김성준 주소 : 경기 용인 분당수지 U타워 등록번호 : 142-07-27414
통신판매업 신고 : 제2012-용인수지-0185호 출판업 신고 : 수지구청 제 123호 개인정보보호최고책임자 : 김성준 sjkim70@stechstar.com
대표전화 : 010-4589-2193 [fax] 02-6280-1294 COPYRIGHT(C) stechstar.com ALL RIGHTS RESERVED